DC Electric Booster Pump #9050
The EBP23 is a ‘brushless’ 12 volt, high flow (23 litres / 6 gallons per minute), magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required.
Specifications :
Motor: 12V Brushless
Operating Voltage: 6V to 18V
Rated Current Draw: 1.25 Amps
Hose Size:
19mm (3/4" Inch)
*With EBP Adapters Reducer
(19mm to 12mm)
Pump Design: Recirculating * Centrifugal
Input Power: 15W
Max Flow Rate @ 0 Bar: 23 l/min (6 gal/min)
Rated Flow Rate @ 0.1 Bar: 17.25 l/min (4.6gal/min)
Max Head Height: 2.5 meters
Drive: Magnetic – No seals
Operating Temperature: -40C to +125C (-10F to +257F)
Burst Pressure: 250Kpa (36PSI)
IP Rating: IP68
Self Priming: No
Weight: 364g (0.8 lbs)
Rated Life : 20,000 hrs
Kit Contents :
Electric Booster Pump - EBP23 : 1
EBP Adapters Stepped (19mm to 12mm): 2
Heater Hose 19mm ID: 11cm
Hose Clamps: 4
Mounting Brackets: 1
Wiring Loom (AMP Plug): 1
Installation Instructions : 1
Davies Craig standard kits include a pump and wiring harness; hose adapters, hose clamps, and adapter hose are available in some kits.
Part Type | Waterpumps |
---|---|
Product Line | Engine Cooling |
Brand | Davies Craig |